ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင်
  • ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် - 0 ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် - 0

ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင်

Resilient Seat Seal Gate Valves များကိုလည်း၊ lift gate gate valves များဟုလည်းခေါ်ကြသည်။ အဆို့ရှင်၏ထိပ်ပေါ်ရှိအခွံမာများနှင့်အဆို့ရှင်ကိုယ်ထည်ရှိလမ်းညွှန် groove မှတဆင့် trapezoidal ချည်သည်ပုံမှန်အားဖြင့် lifting rod ပေါ်တွင်တည်ရှိပြီး rotary motion အား linear motion သို့ပြောင်းလဲသည်။ ဆိုလိုသည်မှာ operating torque ကို operating thrust သို့ပြောင်းသည်။ Resilient Seat Seal Gate Valve များ၏တံခါးဖွင့်ခြင်းနှင့်ပိတ်ခြင်းသည်တံခါးဖြစ်သည်။ ဂိတ်တံခါး၏လှုပ်ရှားမှု ဦး တည်ချက်အရည်၏ညှနျကွားမှ perpendicular ဖြစ်ပါတယ်။ ၎င်းကိုအပြည့်အဝဖွင့ ်၍ ပိတ်နိုင်သည်၊ သို့သော်ညှိ။ မရ၊ Milestone Valve ကုမ္ပဏီမှထုတ်လုပ်သော Resilient Seat Seal Gate Valves များသည်ရေရှည်၊ ဓာတုဗေဒနှင့်ရေထိန်းသိမ်းစောင့်ရှောက်ခြင်းကဲ့သို့သောနယ်ပယ်များတွင်အသုံးပြုသည်။

စုံစမ်းမေးမြန်းရန်ပေးပို့ပါ။

ကုန်ပစ္စည်းအကြောင်းအရာ

ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင်

ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် are also called lifting stem gate valves, also called rising stem gate valves. Usually there is a trapezoidal thread on the lifting rod, through the nut on the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is changed into operating thrust. The opening and closing part of ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. It can only be fully opened and closed, but cannot be adjusted or throttled. The ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် produced by Milestone Valve Company have stable performance and are used in various fields such as petroleum, chemical industry, and water conservancy.


2. နည်းပညာဆိုင်ရာ Parametersဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင်

Valve အမျိုးအစား
ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ် Valve
DN
DN50~DN1600
PN(MPaï¼ ‰
1.0~2.5Mpa, 4.0ï½1616Mpa,
ဒီဇိုင်းအပူချိန် Range
-15â "4ž425â"
သက်ဆိုင်ရာအလတ်စား
ရေ၊ ရေနံ၊ သဘာဝဓာတ်ငွေ့နှင့်အမျိုးမျိုးသောချေးပစ္စည်းများ
ချိတ်ဆက်မှုအမျိုးအစား:
အနားကွပ်
Actuator အမျိုးအစား
manual drive, pneumatic, Hydraulic (သို့) လျှပ်စစ် actuator

အပိုပစ္စည်းများ
ပစ္စည်း
Body €Bonnetã Disc

သံ၊ သံထည်, သံမဏိ, သံမဏိ,

ပင်မ
အစွန်းခံသံမဏိ
မျက်နှာပြင်တံဆိပ်ခတ်
ကြေး၊ သံမဏိ၊ မာမာသတ္တုစပ် NBR, epdm
တံဆိပ်ခတ် Shim
ပြောင်းလွယ်ပြင်လွယ်သောဖိုက်၊ 1Cr13 / ပြောင်းလွယ်ပြင်လွယ်သောဖိုက်
ထုပ်ပိုး အိုလက်စွပ်ပြောင်းလွယ်ပြင်လွယ်ဖိုက်



3.Key points of operation of ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင်:

1) The opening and closing direction of ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် should always be closed clockwise.
2. Pneumatic valves in the ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် pipe network are often opened and closed manually, and the number of opening and closing revolutions should not be too much, that is, large-diameter valves should also be within 200-600 revolutions.
3) ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် In order to facilitate the opening and closing operation of one person, the larger opening and closing torque should be 240N-m under the pressure of the pipeline.
4) The opening and closing end of ဒဏ်ခံထိုင်ခုံတံဆိပ်ခတ်အဆို့ရှင် should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.


4. ထုပ်ပိုးခြင်းနှင့်ဖြန့်ဝေ


၁။ အဆို့ရှင်အတွက်နမူနာမှာယူနိုင်မလား။
A: အရည်အသွေးစစ်ဆေးရန်နှင့်စစ်ဆေးရန်အတွက်နမူနာအော်ဒါမှာယူသည်။ ရောထွေးသောနမူနာကိုလက်ခံသည်။
2. အဆို့ရှင်အမှာစာအတွက် MOQ ကန့်သတ်ချက်ရှိပါသလား။
ဖြေ - MOQ နည်းတာ၊ နမူနာစစ်ဆေးဖို့ ၁ ခုရရှိနိုင်ပါတယ်။
၃။ OEM ၀ န်ဆောင်မှုကိုပေးနိုင်မလား။
A: ဟုတ်တယ်၊ OEM ကလွယ်ပါတယ်။
ငွေပေးချေမှုကောဘယ်လိုလဲ။
A: ပုံမှန်အားဖြင့်ကျွန်ုပ်တို့သည် ၃၀% အပ်ငွေကိုလက်ခံပါသည်။ လက်ကျန်ငွေကိုသင်္ဘောမတင်မီပေးဆောင်ပါမည်။ L7C ဟာအဆင်ပြေပါတယ်
၅။ သင်၏လိပ်ပြာအဆို့ရှင်သယ်ယူပို့ဆောင်ရေးအချိန်မည်မျှရှိသနည်း။
A: DN50-DN600 အရွယ်အစားအများစုတွင်ကျွန်ုပ်တို့တွင်အဆို့ရှင်များရှိသည်။ ၁ ပတ်မှ ၃ ပတ်အတွင်းအနီးဆုံးဆိပ်ကမ်း Tianjin သို့ပို့နိုင်သည်။
၆ ။
A: ပုံမှန်အားဖြင့် ၁၂ လအာမခံဝန်ဆောင်မှုများသို့မဟုတ်ကုန်ပစ္စည်းတင်ပို့သည့် နေ့မှစ၍ ၁၈ လကြာသည်။
7. သင်၏ထုတ်ကုန်စံချိန်စံညွှန်းကဘာလဲ?
A: GB / T12238-2008, JBfT 8527-1997, API 609, EN 593-1998, DIN 85003-3-1997


၆။ ဆက်သွယ်ရန်အချက်အလက်

Hot Tags: ကုန်ကြမ်းပေးသွင်းသူများ၊ စက်ရုံ၊ စိတ်ကြိုက်ပြင်ဆင်ထားသည်၊ ကုန်ပစ္စည်းသိုလှောင်ထားသည့်ပမာဏ၊ အခမဲ့နမူနာ၊ တရုတ်နိုင်ငံ၊ တရုတ်နိုင်ငံတွင်လုပ်သည်။

စုံစမ်းမေးမြန်းရန်ပေးပို့ပါ။

ကျေးဇူးပြု၍ အောက်ပါပုံစံဖြင့် သင်၏စုံစမ်းမေးမြန်းမှုကို အခမဲ့ပေးပါ။ 24 နာရီအတွင်း သင့်အား အကြောင်းပြန်ပါမည်။
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy